VEELOK INSTRUMENT VALVE فروش
شرکت VEE LOK یکی از تولید کنندگان کشور کره جنوبی در زمینه کانکتور و اقلام ابزار دقیق می باشد تولیدات این شرکت به دلیل استفاده از تجهیزات پیشرفته دارای کیفیت بالا و دوام طولانی می باشد.
محصولات شرکت VEE LOK
- TWIN FERRULE PIPE FITTINGS
- INSTRUMENT PIPE FITTINGS
- NEEDLE VALVES
- CHECK VALVES
- VALVE MANIFOLDS
پخش فولاد ماهان از سال ۱۳۷۲ مبادرت به تهیه ،توزیع و ساخت تجهیزات مورد نیاز صنعت نفت (پتروشیمی -پالایشگاهی و نیروگاهی)،ساختمانی و سایر صنایع
مرتبط نموده است .
این مجموعه با بهره گیری از پرسنل متخصص و اطلاعات به روز، پیشینه قابل قبولی در عرضه خدمات وپیشرفت صنعت کشور داراست و طیف وسیعی از خدمات
و ملزومات صنعتی و ساختمانی مورد نیاز کشورها را تامین می نماید.کلیه این تجهیزات دارای گواهینامه و تاییده نیز می باشد.
پخش فولاد ماهان با بیش از ۱۶ سال تجربه در زمینه ساخت و تولید و واردات قطعات و تجهیزات صنعتی و ساختمانی و همچنین مشاوره در هنگام خرید قصد دارد
به منظور تامین نیازمشتریان اقلام تولیدی خود را به صورت مستقیم و بدون واسطه به منظور کاهش قیمت و اطمینان مشتریان
از نظر کیفیت کالا و استاندارد مربوطه در اختیار آنان قرار دهد.
محصولات قابل ارائه توسط این شرکت به شرح ذیل می باشد :
انواع لوله فولادی و استنلس با برند های :
TUBOS , MITTAL , ARCELOR MITTAL , INTERPIPE , SUMITOMO , NIPPON STEEL , MANESMANN , SANDVIK , BAOFENG , TPCO , HEBEI HUIKE , SLOK , UNILOK,
انواع اتصالات با برند های:
BENKAN BY BENEX , TECNOFORGE, ERNE FITTING, BOTHWELL , MEGA , JD , SLOK , VEE LOK , C LOK , PARKER , SWAGELOK , BONNY FORGE, TK BEND , F METAL , CHERO , ULMA , BKL ,
انواع فلنج با برند های:
MELESI , FAD , GALPERTI , BINDA GALPERTI , BENKAN , ULMA , MRG , ST&H , F METAL , CROWN , VIRAJ
انواع شیر آلات با برند های:
KTM , KITZ , BONNY FORGE , CHERO PIPING , DOUGLAS CHERO , KVC , JC , AIL , AUDCO , ORION , EBRO , MAW , GOODWIN , MASONEILAN , SEAMENS , HONEYWELL , JDV , NEWAY , KOKO , LVF
جهت دریافت اطلاعات بیشتر با شماره های ۸-۸۸۷۰۸۵۲۶ و یا پست الکترونیک : INFO@PFMAHAN.COM تماس حاصل فرمایید.
پخش فولاد ماهان تهران (سهامی خاص)
تلفن: ۸-۸۸۷۰۸۵۲۶
ایمیل: INFO@PFMAHAN.COM
وبسایت: WWW.PFMAHAN.COM ; WWW.PFMAHAN.IR
Instrument Valve
Needle Valve, Manifold, Check and Proportional Relief Valve
www.veelok.com
valve & fitting
Multiport Gauge Valve
۱۶～۱۹
Needle Valve
۰۲～۱۵
Instrument Manifolds
۲ Valve Manifold
۳ Valve Manifold
۵ Valve Manifold
۲۲～۲۳
۲۴～۲۵
۲۶～۲۸
Index
Proportional Relief Valve
RV01 Series
۲۹
Check Valve
CV01 Series
۳۳
Adjustable Overload Protector
AOP Series
۴۳
Pressure Gauge Snubber
PGS Series
۴۲
Filter
F Series / TF Series
۴۴
Ball Valve
۳۵～۴۱
Gauge Adapter
GA Series
۴۶
Instrument Valves and Manifolds 1
valve & fitting
valve & fitting
Hexagonal Bar Stock Needle Valve
HBNV Series
Component Valve Body Material
۳۱۶L S.S. Carbon Steel
Body 316L S.S./A479 Carbon Steel /A108
Bonnet 316L S.S./A479 Carbon Steel /A108
Stem 316L S.S./A276 304 S.S./A276
Adjuster 316L S.S./A276 Carbon Steel /A108
Lock Nut 316L S.S./A276 Carbon Steel /A108
Handle 303 S.S./A276 Carbon Steel /A108
Fixing Screw 302 S.S. Zinc plated steel
Packing PTFE PTFE
Pusher 316 S.S./A276 316 S.S./A276
Dust Cap NBR NBR
Lock Pin 303 S.S./A276 303 S.S./A276
Bleed Screw 2 316 S.S./A276 316 S.S./A276
Features
■Maximum working pressure:
۶۰۰۰ psi (414bar) at 100°F (38°C)
۱۰۰۰۰ psi (690bar) at 100°F (38°C)
■Working temperature:
-۶۵°F (-54°C) to 464°F (240°C)
-۶۵°F (-54°C) to 842°F (450°C)
■ PTFE packings can be adjusted to extend the valve
life.
■ Non rotating stem design to reduce the galling and provide
excellent seal on seat.
■ Stem threads are rolled and lubricated to prevent galling
and reduce operating torque.
■ Sealing area below the threads protects from the contaminant
by process and prevents lubricant washout.
■ Safety back seating seal in fully open position to perform
a secondary stem seal.
■ Body to bonnet seal creates metal to metal constant
and reliable compression.
■ Bonnet lock pin prevents accidental removal while in
service.
■ Optional sour gas service conforms to NACE MR0175.
■ Hydro test performed with pure water at 1.5 times of
working pressure
■ ۱۰۰% factory test
■ Material traceability
Material of Construction
Note:
۱٫ Packing is optional with graphite for high temperature
to 450℃.
۲٫ Optional with bleed screw
DUST CAP
HANDLE FIXING SCREW
BONNET
PUSHER
PACKING
PACKING
ADJUSTER
LOCK NUT
STEM
TRIM
۲ Instrument Valves and Manifolds
valve & fitting
Ordering No. End Connection Orifice
(bore)
Dimensions (mm)
Inlet Outlet L L1 H H1 W
HBNV□۸MF 1/2”NPT male 1/2”NPT female 5 89 38 90 32 57
HBNV□۸FF 1/2”NPT female 1/2”NPT female 5 76 38 90 32 57
HBNV□۳۴۱۲MF 3/4”NPT male 1/2”NPT female 5 89 38 90 32 57
HBNV□۱۲MF 3/4”NPT male 3/4”NPT female 5.5 89 38 93 35 57
HBNV□۱۲FF 3/4”NPT female 3/4”NPT female 5.5 76 38 93 35 57
HBNV□۱۶MF 1”NPT male 1”NPT female 6 94 42.5 99 41 57
HBNV□۱۶FF 1”NPT female 1”NPT female 6 85 42.5 99 41 57
HBNV□۸MF90 1/2”NPT male 1/2”NPT female 5 – – 121.3 37.5 57
HBNV□۴MFSQ 1/4”NPT male 1/4”NPT female 4.5 60 30 85.2 25.4 46
HBNV□۴FFSQ 1/4”NPT female 1/4”NPT female 4.5 60 30 85.2 25.4 46
HBNV□۶MFSQ 3/8”NPT male 3/8”NPT female 4.5 60 30 85.2 25.4 57
HBNV□۶FFSQ 3/8”NPT female 3/8”NPT female 4.5 60 30 85.2 25.4 57
HBNV□۸MFSQ 1/2”NPT male 1/2”NPT female 4.5 66 33 85.9 29 57
HBNV□۸FFSQ 1/2”NPT female 1/2”NPT female 4.5 66 33 85.9 29 57
Flow Characteristics
Dimensions
Pressure Vs. Temperature
All dimensions shown are for reference and subject to change without prior notice.
Sizes listed are standard. Other sizes and end types are available upon request. Refer to ordering information.
Graphite
Instrument Valves and Manifolds 3
Standard Material
Ordering Information
Valve Body Bonnet Stem Packing Trim
۳۱۶L SS 316-A479 316-A479 316-A276 PTFE 316-A276
Carbon Steel A108 A108 304-A276 PTFE 304-A276
HBNV S 8 MF 10 B
Series Body Material Size End Connection Optional
HBNV S 316L S.S. 4 1/4” M Male 90 Angle pattern
C Carbon Steel 6 3/8” F Female 10 10000 psi
۸ ۱/۲” B Bleeding screw
۱۲ ۳/۴” G Graphite
۱۶ ۱” BSPT BSPT thread
SQ Square body
Note:
۱٫ Refer to chemical resistance guide and choose suitable elastomer for your application.
۲٫ Carbon steel valves are yellow zinc plated to resist corrosion.
۴ Instrument Valves and Manifolds
valve & fitting
valve & fitting
Double Block & Bleed Valve
DBB01 series
Component Valve Body Material
۳۱۶ L S.S. Carbon Steel
Body 316 L S.S./A479 Carbon Steel/A108
Bonnet 316 L S.S./A479 Carbon Steel/A108
Stem 316 L S.S./A276 304 S.S./A276
Adjuster 316 L S.S./A276 316 S.S. /A276
Lock Nut 316 L S.S./A276 Carbon Steel /A108
Handle 303 S.S./A276 Carbon Steel/A108
Fixing Screw 302 S.S. Zinc plated steel
Packing PTFE PTFE
Washer 316 L S.S./A276 316 S.S./A276
Pusher 316 L S.S./A276 316 S.S./A276
Dust Cap NBR NBR
Lock Pin 303 S.S./A276 303 S.S./A276
Features
■Maximum working pressure:
۶۰۰۰ psi (414bar) at 100°F (38°C)
۱۰۰۰۰ psi (690bar) at 100°F (38°C)
■Working temperature:
-۶۵°F (-54°C) to 464°F (240°C)
■ Double block & bleed manifolds are designed to mount
to pressure gauges, pressure transmitters and pressure
switches.
■ A compact design is to provide significant savings on
space, weight, installation and cost.
■Standard vent port in 1/4”NPT female
Material of Construction
Dimensions
Instrument Valves and Manifolds 5
valve & fitting
Ordering Information
DBB01 S 8 MF 10
Series Body Material Size End Connection Optional
DBB01 S 316 S.S. 4 1/4” M Male 10 10000 psi
C Carbon Steel 8 1/2” F female G Graphite
Ordering No.
End Connection
Orifice(bore)
Inlet/Process Outlet/Instrument Test/Vent
DBB01□۸MF 1/2”NPT male 1/2”NPT female 1/4”NPT female 5
DBB01□۸FF 1/2”NPT female 1/2”NPT female 1/4”NPT female 5
All dimensions shown are for reference and subject to change without prior notice.
Sizes listed are standard. Other sizes and end types are available upon request. Refer to ordering information.
۶ Instrument Valves and Manifolds
valve & fitting
Hexagonal Bar Stock Needle Valve
SNV Series
Component Valve Body Material
۳۱۶L S.S. Carbon Steel
Body 316L S.S./A479 Carbon Steel/A108
Bonnet 316L S.S./A479 Carbon Steel/A108
Stem 316L S.S./A276 304 S.S./A276
Adjuster 316L S.S./A276 Carbon Steel/A108
Lock Nut 316L S.S./A276 Carbon Steel /A108
Handle 303 S.S./A276 Carbon Steel/A108
Fixing Screw 302 S.S. Zinc plated steel
Packing PTFE PTFE
Pusher 316 S.S./A276 316 S.S./A276
Dust Cap NBR NBR
Lock Pin 303 S.S./A276 303 S.S./A276
Seat POM POM
Features
■Maximum working pressure:
۶۰۰۰ psi (414bar) at 100°F (38°C)
■Working temperature:
POM Seat: -20°F (-28°C) to 200°F (93°C)
PEEK Seat: -20°F (-28°C) to 400°F (204°C)
■ Straight-through design provides high capacity with bidirectional
flow and is roddable for easy cleaning.
■ PTFE packings can be adjusted to extend the valve
life.
■ Stem threads are rolled and lubricated to prevent galling
and reduce operating torque.
■ Sealing area below the threads protects from the contaminant
by process and prevents lubricant washout.
■ Safety back seating seal in fully open position to perform
a secondary stem seal.
■ Bonnet lock pin prevents accidental removal while in
service.
■ Optional sour gas service conforms to NACE MR0175.
■ Hydro test performed with pure water at 1.5 times of
working pressure
■ ۱۰۰% factory test
■ Material traceability
Material of Construction
DUST CAP
HANDLE FIXING SCREW
BONNET
PUSHER
PACKING
PACKING
ADJUSTER
LOCK NUT
STEM
Note:
۱٫ Optional PEEK seat is available.
Instrument Valves and Manifolds 7
Ordering No. End Connection Orifice
(bore)
Dimensions (mm)
Inlet Outlet L L1 H H1 W
SNV□۸MF 1/2”NPT male 1/2”NPT female 5 89 38 94 32 57
SNV□۸FF 1/2”NPT female 1/2”NPT female 5 76 38 94 32 57
SNV□۱۲MF 3/4”NPT male 3/4”NPT female 6 89 38 96 35 57
SNV□۱۲FF 3/4”NPT female 3/4”NPT female 6 76 38 96 35 57
SNV□۱۶MF 1”NPT male 1”NPT female 7 94 42.5 101 41 57
SNV□۱۶FF 1”NPT female 1”NPT female 7 85 42.5 101 41 57
SNV□۸MF90 1/2″NPT male 1/2″NPT female 5 – – 121.3 37.5 57
Flow Characteristics
Dimensions
Pressure Vs. Temperature
POM
All dimensions shown are for reference and subject to change without prior notice.
Sizes listed are standard. Other sizes and end types are available upon request. Refer to ordering information.
۸ Instrument Valves and Manifolds
valve & fitting
Standard Material
Ordering Information
Valve Body Bonnet Stem Packing Seat
۳۱۶L SS 316-A479 316-A479 316-A276 PTFE or Viton Oring with PTFE backup ring POM
Carbon Steel A108 A108 304-A276 PTFE or Viton Oring with PTFE backup ring POM
SNV S 8 MF 90
Series Body Material Size End Connection Optional
SNV S 316L S.S. 4 1/4” M Male PK PEEK seat
C Carbon Steel 6 3/8” F Female VT Viton O-ring with PTFE
back-up rings
۸ ۱/۲” ۹۰ Angle pattern
۱۲ ۳/۴” BSPT BSPT thread
۱۶ ۱”
Note:
۱٫ Valves are standard with POM soft seat and PTFE packings.
۲٫ Refer to chemical resistance guide and choose suitable elastomer for your application.
۳٫ Carbon steel valves are yellow zinc plated to resist corrosion.
Instrument Valves and Manifolds 9
valve & fitting
valve & fitting
Square Bar Stock Needle Valve
BNV Series
Component Valve Body Material
۳۱۶L S.S. Carbon Steel
Body 316L S.S./A479 Carbon Steel/A108
Bonnet 316L S.S./A479 Carbon Steel/A108
Stem 316L S.S./A276 304 S.S./A276
Handle 303 S.S./A276 Carbon Steel/A108
Fixing Screw 302 S.S./A276 Zinc plated steel
Lock Pin 303 S.S./A276 303 S.S./A276
O-Ring Viton Viton
Back-Up Ring PTFE PTFE
Dust Cap NBR NBR
Features
■Maximum working pressure:
۶۰۰۰ psi (414bar) at 100°F (38°C)
■Working temperature:
-۲۲°F (-30°C) to 392°F (200°C)
■ Compact design provides economical and long service
life.
■ Non rotating stem design to reduce the galling and provide
excellent seal on seat.
■ Stem threads are rolled and lubricated to prevent galling
and reduce operating troque.
■ Sealing are below the threads protects from the contaminant
by process and prevents lubricant washout.
■ Safety back seating seal in fully open position to perform
a secondary stem seal.
■ Body to bonnet seal is metal to metal in constant compression,
creating a reliable seal point to eliminate
possible tensile breakage of bonnet and isolate bonnet
threads from process fluid corrosion.
■ Bonnet lock pin prevents accidental removal while in
service.
■ Hydro test performed with pure water at 1.5 times of
working pressure
■ ۱۰۰% factory test
■ Material traceability
Material of Construction
DUST CAP
HANDLE FIXING SCREW
PLASTIC
ROUND KNOB
BONNET
STEM
VITON O-RING
TRIM
PTFE BACKUP
RING
Note:
Optional with
۱٫ VEE-LOK twin ferrule tube end
۲٫ panel mountable nuts
۳٫ bleeding screw
۴٫ black plastic round knob
۱۰ Instrument Valves and Manifolds
valve & fitting
Ordering No. End Connection Orifice
(bore)
Dimensions (mm)
Inlet Outlet L L1 H H1 W
BNV□۲MF 1/8”NPT male 1/8”NPT female 3 57 27 64 19 46
BNV□۲FF 1/8”NPT female 1/8”NPT female 3 57 28.5 64 19 46
BNV□۴MF 1/4”NPT male 1/4”NPT female 3.2 57 27 64 19 46
BNV□۴FF 1/4”NPT female 1/4”NPT female 3.2 57 28.5 64 19 46
BNV□۶MF 3/8”NPT male 3/8”NPT female 4.5 65 31 70.5 25.4 57
BNV□۶FF 3/8”NPT female 3/8”NPT female 4.5 62 31 70.5 25.4 57
BNV□۸MF 1/2”NPT male 1/2”NPT female 4.5 74 35 74 29 57
BNV□۸FF 1/2”NPT female 1/2”NPT female 4.5 70 35 74 29 57
Flow Characteristics
Dimensions
Pressure Vs. Temperature
All dimensions shown are for reference and subject to change without prior notice.
Sizes listed are standard. Other sizes and end types are available upon request. Refer to ordering information.
Instrument Valves and Manifolds 11
Ordering No. End Connection Orifice
(bore)
Dimensions (mm)
Inlet Outlet L H H1 W
TBNV□۲OD 1/8” O.D. 1/8” O.D. 2.2 63.6 46 19 46
TBNV□۴OD 1/4” O.D. 1/4” O.D. 3.2 65 46 19 46
TBNV□۶OD 3/8” O.D. 3/8” O.D. 4.5 68 57 25.4 57
TBNV□۸OD 1/2” O.D. 1/2” O.D. 4.8 73.2 57 25.4 57
TBNV□M6OD 6mm O.D. 6mm O.D. 3.2 65 46 19 46
TBNV□M12OD 12mm O.D. 12mm O.D. 4.8 73.2 57 25.4 57
Dimensions shown are Vee-Lok twin ferrule tube nuts finger-tightened and subject to change without prior notice.
Sizes listed are standard. Other sizes and end types are available upon request. Refer to ordering information.
Standard Material
Ordering Information
Valve Body Bonnet Stem Packing Trim
۳۱۶L SS 316-A479 316-A479 316-A276 Viton 316-A276
Carbon Steel A108 A108 304-A276 Viton 304-A276
BNV S 4 MF
Series Body Material Size End Connection Optional
BNV S 316L S.S. 2 1/8” M Male PN Panel mountable
TBNV C Carbon Steel 4 1/4” F Female B M6 bleeding screw
۶ ۳/۸” OD VEE-LOK twin ferrule
tube fittings R Plastic round knob
۸ ۱/۲” BSPT BSP Taper
M6 6mm BSPP BSP parallel
M12 12mm
Note:
۱٫ Refer to chemical resistance guide and choose suitable elastomer for your application.
۲٫ Carbon steel valves are yellow zinc plated to resist corrosion.
۱۲ Instrument Valves and Manifolds
valve & fitting
valve & fitting
Mini Valves
MNV Series
MSNV Series
Component Valve Body Material
۳۱۶L S.S. Carbon Steel
Body 316L S.S./A479 Carbon Steel/A108
Bonnet 316L S.S./A479 Carbon Steel/A108
Stem 316L S.S./A276 316L S.S./A276
Handle 303 S.S./A276 Carbon Steel/A108
Fixing Screw 302 S.S./A276 Zinc plated steel
O-Ring Viton Viton
Back-Up Ring PTFE PTFE
Washer 316 S.S./A479 316 S.S./A479
Soft Seat POM POM
Features
■Maximum working pressure:
۳۰۰۰ psi (207bar) at 100°F (38°C)
■Working temperature:
-۲۲°F (-30°C) to 392°F (200°C)
■ Mini valves facilitate safe, compact and economical installations.
■ Valve seating is interchangeable between “Hard” or
“Soft”without changing the bonnet assembly. When
soft seat becomes damaged, it can be removed and
leave a metal seated valve to extend service life.
■ Orings below threads prevents lubricant washout,
thread corrosion and keep thread from process contamination.
■ Chrome plating of 316 SS stem on 316 SS valve to
reduce galling or freezing of stem threads when similar
metals mate. Carbon steel valves use 316 SS stem.
■ Hydro test performed with pure water at 1.5 times of
working pressure
■ ۱۰۰% factory test
■ Material traceability
Material of Construction
Note:
۱٫ Hard seat valves installed with 303 SS Tee handles.
۲٫ Soft seat valves with CS round handle.
HANDLE FIXING SCREW
BONNET
STEM
ROUND KNOB
FIXING
SCREW
WASHER
SOFT SEAT
BODY
VITON O-RING
VITON O-RING
PTFE BACK-UP
RING
Instrument Valves and Manifolds 13
Ordering No. End Connection Orifice
(bore)
Dimensions (mm)
Inlet Outlet L L1 H H1 W
MNV□۴MF 1/4”NPT male 1/4”NPT female
۳
۴۸ ۲۴ ۴۸٫۵ ۱۹ ۳۲
MNV□۴FF 1/4”NPT male 1/4”NPT female 48 24 48.5 19 32
MNV□۴FF90 1/4”NPT female 1/4”NPT female 38 38 66.5 19 32
MSNV□۴MF 1/4”NPT male 1/4”NPT female 48 24 47.5 19 26
MSNV□۴FF 1/4”NPT female 1/4”NPT female 48 24 47.5 19 26
MSNV□۴FF90 1/4”NPT female 1/4”NPT female 38 38 66.5 19 26
Flow Characteristics
Dimensions
Pressure Vs. Temperature
All dimensions shown are for reference and subject to change without prior notice.
Sizes listed are standard. Other sizes and end types are available upon request. Refer to ordering information.
POM
۱۴ Instrument Valves and Manifolds
valve & fitting
Standard Material
Ordering Information
Valve Body Bonnet Stem Packing Seat
۳۱۶L SS 316-A479 316-A479 Chrome Plating316-A276 Viton POM
Carbon Steel A108 A108 316-A276 Viton POM
MNV S 4 MF
Series Body Material Size End Connection Optional
MNV Hard Seat S 316L S.S. 2 1/8″ M Male 90 Angle pattern
MSNV Soft Seat C Carbon Steel 4 1/4” F Female
Note:
۱٫ Refer to chemical resistance guide and choose suitable elastomer for your application.
۲٫ Carbon steel valves are yellow zinc plated to resist corrosion.
Instrument Valves and Manifolds 15
valve & fitting
valve & fitting
Multiport Gauge Valve
MPGV Series
Component Valve Body Material
۳۱۶L S.S. Carbon Steel
Body 316L S.S./A479 Carbon Steel/A108
Bonnet 316L S.S./A479 Carbon Steel/A108
Stem 316L S.S./A276 304 S.S./A276
Adjuster 316L S.S./A276 Carbon Steel/A108
Lock Nut 316L S.S./A276 Carbon Steel/A108
Handle 303 S.S./A276 Carbon Steel/A108
Fixing Screw 302 S.S. Zinc plated steel
Packing PTFE PTFE
Pusher 316 S.S./A276 316 S.S./A276
Dust Cap NBR NBR
Lock Pin 303 S.S./A276 303 S.S./A276
Features
■Maximum working pressure:
۶۰۰۰ psi (414bar) at 100°F (38°C)
۱۰۰۰۰ psi (690bar) at 100°F (38°C)
■Working temperature:
Metal Seat: -65°F (-54°C) to 464°F (240°C)
POM Seat: -20°F (-28°C) to 200F (93°C)
■ Multiport gauge valves allow the versatile positioning
of gauges or pressure switches without requiring additional
penetration of the main piping.
■ Standard configuration has a male 1/2”NPT or 3/4”
male inlet and three 1/2”NPT female outlet ports.
■ Available with metal seats or soft seats operating in
dirty service with repetitive bubble tight shutoff.
■ Compact design requires minimum space for operation
and installation and realizes cost savings to reduce the
numbers of components and decrease possible leak
points.
■ PTFE packings can be adjusted to extend the valve
life.
■ Non rotating stem design to reduce the galling and provide
excellent seal on seat
■ Stem threads are rolled and lubricated to prevent galling
and reduce operating torque.
■ Sealing area below the threads protects from the contaminant
by process and prevents lubricant washout.
■ Safety back seating seal in fully open position to perform
a secondary stem seal.
■ Body to bonnet seal creates metal to metal constant
and reliable compression.
■ Bonnet lock pin prevents accidental removal while in
service.
■ Optional sour gas service conforms to NACE MR0175.
■ Hydro test performed with pure water at 1.5 times of
working pressure
■ ۱۰۰% factory test
■ Material traceability
Material of Construction
Note:
۱٫ Packing is optional with graphite for high temperature
to 450℃.
۲٫ POM soft seat limits working temperature to
۹۳℃(۲۰۰℉) maximum.
۳٫ Optional accessories: plug and bleed valve.
DUST CAP
HANDLE FIXING SCREW
BONNET
PUSHER
PACKING
PACKING
ADJUSTER
LOCK NUT
STEM
TRIM
۱۶ Instrument Valves and Manifolds
valve & fitting
Component Valve Body Material
۳۱۶L S.S. Carbon Steel
Body 316L S.S./A479 Carbon Steel/A108
Stem 316L S.S./A276 316L S.S./A276
Component Valve Body Material
۳۱۶L S.S. Carbon Steel
Body 316L S.S./A276 Carbon Steel/A108
Bleed valves can be used on gauge valves to bleed pressure
before the removal of an instrument.
Bleed valves and plugs are purchased separately.
Flow Characteristics
Optional Accessories
Bleed Valve Plugs
Pressure Vs. Temperature
Ordering No. Size
BV□۴ ۱/۴”NPT male
BV□۸ ۱/۲”NPT male
Ordering No. Size
PP□۴ ۱/۴”NPT male
PP□۸ ۱/۲”NPT male
When venting out the pressure, open the valve
slowly and direct the vent hole away from the
operator for safety.
POM
Instrument Valves and Manifolds 17
Ordering No. End Connection Orifice
Inlet/Process Outlet/Instrument Test/Vent (bore)
MPGV□۸ ۱/۲”NPT male 1/2”NPT female 1/2”NPT female 5
MPGV□۱۲۸ ۳/۴”NPT male 1/2”NPT female 1/2”NPT female 5
Ordering No. End Connection Orifice
Inlet/Process Outlet/Instrument Test/Vent (bore)
MPGV□۸LB 1/2”NPT male 1/2”NPT female 1/2”NPT female 5
MPGV□۱۲۸LB 3/4”NPT male 1/2”NPT female 1/2”NPT female 5
Dimensions
All dimensions shown are for reference and subject to change without prior notice.
Sizes listed are standard. Other sizes and end types are available upon request. Refer to ordering information.
۱۸ Instrument Valves and Manifolds
valve & fitting
Standard Material
Hard Seat
Soft Seat
Ordering Information
Valve Body Bonnet Stem Packing Trim
۳۱۶L SS 316-A479 316-A479 316-A276 PTFE 316-A276
Carbon Steel A108 A108 304-A276 PTFE 304-A276
Valve Body Bonnet Stem Packing Seat
۳۱۶L SS 316-A479 316-A479 316-A276 PTFE POM
Carbon Steel A108 A108 304-A276 PTFE POM
MPGV S 12 8 LB
Series Body Material Inlet Outlet & Vent Optional
MPGV Hard Seat S 316L S.S. 8 1/2” ۸ ۱/۲” LB Long body
SMPGV Soft Seat C Carbon Steel 12 3/4” VT Viton O-rings with PTFE
backup rings
G Low Emission Graphite
BSPT BSPT thread
Note:
۱٫ Refer to chemical resistance guide and choose suitable elastomer for your application.
۲٫ Carbon steel valves are yellow zinc plated to resist corrosion.
Instrument Valves and Manifolds 19
valve & fitting
valve & fitting
Valve Manifolds
Features
Metal Seated Bonnet Assembly
The metal-seated bonnet assembly is designed with a
non rotating stem with a conical trim to provide a repetitive
shutoff and extend service life. Stem threads are
rolled and lubricated to prevent galling and reduce operating
torque. Stem seal is standard with PTFE packings
that can be adjustable in service. Stem packings below
the threads intend to protect from the contaminant by process
and prevent lubricant washout. Safety back seating
in fully open position provides a secondary stem seal. An
NBR dust cover is capped to contain stem lubricant and
keep from particles or contaminants. All bonnets are fitted
with a locking pin to prevent accidental removal while
in service.
۱۰۰۰۰ psi bonnet assembly utilizes a reinforced stem
with mirror finish in packing area to enable smooth stem
operation and benefit packing life.
High temperature bonnet assembly is furnished with
similarly designed stem and bonnet and uses low emission
graphite packings serving to 450℃ maximum. Bonnet
is fitted with a larger size T-bar handle for easy operation.
Soft Seated Bonnet Assembly
The soft-seated bonnet assembly has a one piece rotating
stem and plug. The stem threads are rolled and lubricated
to prevent galling and reduce operating torque.
Stem seal is standard with PTFE packings that can be
adjustable in service. Stem packings below the threads
intend to protect from the contaminant by process and
prevents lubricant washout. Safety back seating in fully
open position provides a secondary stem seal. An NBR
dust cover is capped to contain stem lubricant and keep
from particles or contaminants. All bonnets are fitted with
a locking pin to prevent accidental removal while in service.
POM seat is standard.
Mini Soft-Seated Bonnet Assembly
The mini soft-seated bonnet assembly is designed with a
one-piece rotating stem having a “Vee” tip with a shoulder
to be assembled as a metal or soft seated valve.
Bonnets on Manifolds
Metal Seated Bonnet
Soft Seated Bonnet
Mini Soft Seated Bonnet
۲۰ Instrument Valves and Manifolds
valve & fitting
Features
Valve manifolds are functionally installed to control, measure,
isolate, equalize, calibrate, drain or differentiate the
pressure of liquids and gases. Bonnets and dust covers
are color coded to identify the functions of valves.
■BLUE : ISOLATE
■RED : VENT
■GREEN : EQUALIZE
۲,۳,۵ valves in remote mounting (pipe to pipe) and direct
mounting ( pipe to flange & flange to flange) to the instrument
on 54mm center.
Standard valve on manifolds has a 4.8mm orifice size,
Cv 0.52 max.
Specifications meet MSS-SP-105. Flange design meets
the requirements of MSS SP-99.
Material selection for sour gas service conforming to
NACE MR0175 is optional at request. Material of valve
body is traceable.
Seat and stem seal are hydro tested with pure water at
۱٫۵ times of working pressure and perform to a requirement
of no detectable leakage. Nitrogen test at 1000 psi
for seat and stem seal is conducted with a maximum allowable
leak rate of 0.1 std cm3/min.
Pressure Vs. Temperature
Metal-seated
Soft-seated
Mini Soft-seated
Graphs are based on 316 SS valves with PTFE stem packings.
Instrument Valves and Manifolds 21
۲ Valve Manifolds
Ordering No. End Connection Valve Seat Max. W.P. at
Inlet/Process Outlet/Instrument Vent/Test 38℃(۱۰۰℉)
۲VM01S4MF 1/4”NPT male 1/4”NPT female 1/4”NPT female Metal 6000 psi
۲VM01S4FF 1/4”NPT female 1/4”NPT female 1/4”NPT female Metal 6000 psi
۲VM01S8MF 1/2”NPT male 1/2”NPT female 1/4”NPT female Metal 6000 psi
۲VM01S8FF 1/2”NPT female 1/2”NPT female 1/4”NPT female Metal 6000 psi
Ordering No. End Connection Valve Seat Max. W.P. at
Inlet/Process Outlet/Instrument Vent/Test 38℃(۱۰۰℉)
۲VM02S 1/2”NPT female 1/2”NPT female 1/2”NPT female POM 3000 psi
۲۲ Instrument Valves and Manifolds
valve & fitting
Ordering No. End Connection Valve Seat Max. W.P. at
Inlet/Process Outlet/Instrument Vent/Test 38℃(۱۰۰℉)
۲VM02SH 1/2”NPT female 1/2”NPT female 1/2”NPT female Metal 6000 psi
Ordering No. End Connection Valve Seat Max. W.P. at
Inlet/Process Outlet/Instrument Vent/Test 38℃(۱۰۰℉)
۲VM03S 1/2”NPT female Flange 1/4”NPT female Metal 6000 psi
Instrument Valves and Manifolds 23
valve & fitting
۳ Valve Manifolds
Ordering No. End Connection Valve Seat Max. W.P. at
Inlet/Process Outlet/Instrument Vent/Test 38℃(۱۰۰℉)
۳VM01S 1/2”NPT female 1/2”NPT female 1/4”NPT female Metal 6000 psi
Ordering No. End Connection Valve Seat Max. W.P. at
Inlet/Process Outlet/Instrument Vent/Test 38℃(۱۰۰℉)
۳VM02S 1/2”NPT female For pressure transmitter model 3051 1/4”NPT female Metal 6000 psi
۲۴ Instrument Valves and Manifolds
valve & fitting
Ordering No. End Connection Valve Seat Max. W.P. at
Inlet/Process Outlet/Instrument Vent/Test 38℃(۱۰۰℉)
۳VM03S 1/2”NPT female Flange 1/4”NPT female Metal 6000 psi
Manifold is supplied with two PTFE sealing rings on instrument ports.
Instrument Valves and Manifolds 25
valve & fitting
۱/۲”NPT 1/4”NPT
۱/۴”NPT
۵ Valve Manifolds
Ordering No. End Connection Valve Seat Max. W.P. at
Inlet/Process Outlet/Instrument Vent/Test 38℃(۱۰۰℉)
۵VM01S 1/2”NPT female 1/2”NPT female 1/4”NPT female Metal 6000 psi
Ordering No. End Connection Valve Seat Max. W.P. at
Inlet/Process Outlet/Instrument Vent/Test 38℃(۱۰۰℉)
۵VM02S 1/2”NPT female 1/2”NPT female 1/4”NPT female POM 6000 psi
۹۱
۷۸
۲۶ Instrument Valves and Manifolds
valve & fitting
Ordering No. End Connection Valve Seat Max. W.P. at
Inlet/Process Outlet/Instrument Vent/Test 38℃(۱۰۰℉)
۵VM03S 1/2”NPT female Flange 1/4”NPT female Metal 6000 psi
Ordering No. End Connection Valve Seat Max. W.P. at
Inlet/Process Outlet/Instrument Vent/Test 38℃(۱۰۰℉)
۵VM05S 1/2”NPT female For pressure transmitter model 3051 1/4”NPT female Metal 6000 psi
Manifold is supplied with two PTFE sealing rings on instrument ports.
Instrument Valves and Manifolds 27
valve & fitting
Ordering No. End Connection Valve Seat Max. W.P. at
Inlet/Process Outlet/Instrument Vent/Test 38℃(۱۰۰℉)
۵VM06S 1/2”NPT female Flange 1/4”NPT female Metal 6000 psi
Manifold is supplied with two PTFE sealing rings on instrument ports.
۲۸ Instrument Valves and Manifolds
valve & fitting
valve & fitting
Proportional Relief Valves
RV01 Series
Overview
Valves OPEN when system pressure reaches the set
pressure to release system pressure. Valves CLOSE
when the system pressure falls below the set pressure.
Proportional relief valves open gradually as the pressure
increases. There is no limit for relieving capacity. Therefore,
valves should be selected carefully to conform to
system requirements.
Features
■Set Pressure:
RV01 Series: color coded springs available for a wide
range of set pressure
۵۰ to 6000psig @70℉ (۳٫۴ to 414 bar @20℃)
■Orifice Size:
۳٫۶۰mm
■Back Pressure:
The effect of system back pressure is minimized by the
design of these high pressure valves.
■Variety of end connections
■Adjustable bonnet cap and adjustable set pressure
■ Lock wire to secure cap to maintain set pressure adjustment.
■Label identifies set pressure range
For valves not actuated for a period of time,
initial relief pressure may be higher than the set
pressure.
Materials of Construction
Component Material Grade/ASTM specification
Cap Plug Polypropylene
Adjustment Cap 316L SS/A479
Lock Nut 316L SS/A276
Upper Spring Button 316L SS/A276
Spring 17-7 PH SS/AMS 5678
Lower Spring Button 316 L SS/A276
Bonnet 316L SS/A479
O-Ring Viton
O-Ring Viton
Retainer 316L SS/A276
Stem 316L SS/A479
Seat Retainer 316L SS/A276
O-Ring Viton
Insert 316L SS/A276
Body 316L SS/A479
CAP PLUG
ADJUSTMENT CAP
LOWER SPRING BUTTON
BONNET
LOCK NUT
UPPER SPRING BUTTON
SPRING
O-RING
O-RING
INSERT
BODY
SEAT RETAINER
O-RING
RETAINER
STEM
Instrument Valves and Manifolds 29
Flow Characteristics
RV01 Series
Set Pressure and Resealing Pressure
■ Cracking pressure is the upstream pressure at which
the first indication of flow occurs. The repeatability of
the cracking pressure of each valve after initial relief is
within ±۵% at room temperature.
■ Resealing pressure is the upstream pressure at which
there is no indication of flow. Reasealing pressure is
always lower than set pressure.
■ Back pressure: The pressure of the outlet of the valve.
It increases the set pressure.
RV01 Series
۳۰ Instrument Valves and Manifolds
valve & fitting
Dimensions
Ordering No. End Connections Dimensions, in. (mm)
Inlet Outlet A B C D
RV01S4M4M 1/4”NPT male 1/4”NPT male 28.5 68 28.5 96
RV01S4M4F 1/4”NPT male 1/4”NPT female 28.5 68 27.5 96
RV01S4F4F 1/4”NPT female 1/4”NPT female 27.5 68 27.5 95
RV01S6M6M 3/8”NPT male 3/8”NPT male 28.5 68 28.5 96
RV01S4OD 1/4”O.D. 1/4”O.D. 28.5 68 28.5 96
RV01S6OD 3/8”O.D. 3/8”O.D. 28.5 68 28.5 96
RV01S8OD 1/2”O.D. 1/2”O.D. 28.5 68 28.5 96
RV01SM6OD 6mm O.D. 6mm O.D. 28.5 68 28.5 96
RV01SM8OD 8mm O.D. 8mm O.D. 28.5 68 28.5 96
RV01SM10OD 10mm O.D. 10mm O.D. 28.5 68 28.5 96
RV01SM12OD 12mm O.D. 12mm O.D. 28.5 68 28.5 96
All dimensions are for reference only and are subject to change without
prior notice.
Optional Accessories
Spring Kits
Spring kits include spring, label, lock wire with
seal, spring buttons and installation instructions.
Select a spring kit basic ordering number and
add the spring designator for the desired set
pressure range.
Example: RV01SPK-A
Seal Materials
Viton is the standard seal materials and designated
as basic ordering number as RV01SS.
Buna N, ethylene propylene and neoprene are
available.
Ordering No.
Set Pressure Range Spring
Designator Spring Color
psig bar
RV01SPK-A 50 to 350 3.4 to 24 A White
RV01SPK-B 350 to 750 24 to 51.6 B Blue
RV01SPK-C 750 to 1500 51.6 to 103 C Golden
RV01SPK-D 1500 to 2250 103 to 155 D Black
RV01SPK-E 2250 to 3000 155 to 206 E Green
RV01SPK-F 3000 to 4000 206 to 275 F Yellow
RV01SPK-G 4000 to 5000 275 to 344 G Brown
RV01SPK-H 5000 to 6000 344 to 413 H Orange
Ordering No. O-ring Material Temperature Ranges
℉(℃)
Seal
Designator
RV01SS Viton (standard) 25 to 250 (-4 to 121)
RV01SS-BU Buna N 0 to 250 (-17 to 121) BU
RV01SS-NE Neoprene -10 to 3 00 (-23 to 148) NE
RV01SS-EP Ethylene Propylene 30 to 250 (-1 to 121) EP
Instrument Valves and Manifolds 31
valve & fitting
Factory-Set Valves Valve without spring installed
Factory Test
Valves are available with springs factory-set to a specified
set pressure. Valves are set, tested, locked, and labeled
with the set pressure.
To order, add-SET and a spring designator whose range
includes the desired set pressure to the valve ordering
number.
Example:
RV01S4M4F-SETC
To order, do not specify spring designator on the ordering
number.
Example:
RV01S4M4F
Valves with no spring are supplied without labels.
Valves are factory tested for cracking and resealing performance.
Proportional relief valves should never be used
as code safety relief valves.
Safe Product Selection
When selecting a product, the total system
design must be considered to ensure safe
performance. Function, material compatibility,
adequate ratings, proper installation, operation
and maintenance are the responsibilities of the
system designer and user.
Ordering Information
RV01 S 4 4F BN B
Series Body Material Inlet End Connection Seal Material Spring Kit Color
RV01 S 316L S.S. 4 1/4” M Male Viton A White 50~350psig
۶ ۳/۸” F Female Bu Buna N B Blue350~750psig
M6 6mm OD
VEE-LOK
twin ferrule
tube fittings
NE Neoprene C Golden 750~1500psig
M10 10mm EP Ethylene propylene D Black 1500~2250psig
M12 12mm E Green 2250~3000psig
F Yellow 3000~4000psig
G Brown 4000~5000psig
H Orange 5000~6000psig
۳۲ Instrument Valves and Manifolds
valve & fitting
valve & fitting
CHECK VALVE
CV01 Series
Component Valve Body Material
۳۱۶ S.S.
Inlet Body 316L S.S./A479
O-Ring VITON
O-Ring VITON
Poppet 316L S.S./A479
Spring 302 S.S./A313
Outlet Body 316L S.S./A479
Material 316 SS
Temperature Working Pressure
℃ ℉ Psi Bar
۳۸ ۱۰۰ ۶۰۰۰ ۴۱۴
۹۳ ۲۰۰ ۲۵۰۰ ۱۷۲
۱۲۱ ۲۵۰ ۱۶۳۰ ۱۱۲
۱۵۰ ۳۰۲ ۱۵۴۵ ۱۰۶
۲۰۰ ۳۹۲ ۱۴۵۰ ۱۰۰
Features
■Maximum working pressure:
۶۰۰۰ psi (414 bar)
■Working temperature:
-۲۳℃ to 200℃ (-۱۰℉ to 392℉)
■Cracking pressure:
۱ to 25 psi
■Fixed cracking pressures
Cracking Pressure and Resealing Pressure
■ Cracking pressure is the upstream pressure at which
the first indication of flow occurs.
■ Resealing pressure is the pressure at which there is no
indication of flow.
CV01 Series
Material of Construction
OUTLET BODY
SPRING
POPPET
VITON O-RING
VITON O-RING
INLET BODY
Nominal Cracking
Pressure psi (bar)
Cracking Pressure
Range psi (bar)
Resealing Pressure
Range psi (bar)
۱ (۰٫۰۶) Up to 4 (0.27) Up to 6 (0.41) back
pressure
۵ (۰٫۳۴) ۳ to 9 (0.20 to 0.62) Up to 2 (0.13) back
pressure
۱۰ (۰٫۶۸) ۷ to 15 (0.48 to 1.0) 3 (0.20) or higher
upstream pressure
۲۵ (۱٫۷) ۲۰ to 30 (1.3 to 2.0) 17 (1.1) or higher
upstream pressure
Pressure Vs. Temperature
For valves not actuated for a period of time, initial
cracking pressure may be higher than the set
pressure.
Instrument Valves and Manifolds 33
valve & fitting
Ordering No. End Connection Dimensions (mm)
Inlet Outlet A B C
CV01S2FF 1/8”NPT female 1/8”NPT female 55 14 17
CV01S4FF 1/4”NPT female 1/4”NPT female 62 16 22
CV01S6FF 3/8”NPT female 3/8”NPT female 72 20 24
CV01S8FF 1/2”NPT female 1/2”NPT female 80.5 23 28.58
CV01S12FF 3/4”NPT female 3/4”NPT female 85 22 41
CV01S16FF 1”NPT female 1”NPT female 97 23 47.6
CV01S2OD 1/8” O.D. 1/8” O.D. 65.5 15.5 17
CV01S4OD 1/4” O.D. 1/4” O.D. 73 17.5 20.63
CV01S6OD 3/8” O.D. 3/8” O.D. 80.5 19.5 24
CV01S8OD 1/2” O.D. 1/2” O.D. 90.5 22 28.58
CV01SM6OD 6mm O.D. 6mm O.D. 73 17.5 20.63
CV01SM12OD 12mm O.D. 12mm O.D. 90.5 22 28.58
Dimensions
All dimensions shown are for reference and subject to change without prior notice.
Ordering Information
CV01 S 4 FF
Series Body Material Size End Connection
CV01 S 316L S.S. 2 1/8” MF NPT male-female
۴ ۱/۴” FF NPT female-female
۶ ۳/۸” OD VEE-LOK twin ferrule tube fittings
۸ ۱/۲”
۱۲ ۳/۴”
۱۶ ۱”
M6 6mm
M12 12mm
۳۴ Instrument Valves and Manifolds
valve & fitting
High Pressure Ball Valve
HPBV01 series
No. Component Material Grade
ASTM specification
۱ Lock Nut 304 S.S.
۲ Fixing Washer 304 S.S.
۳ Handle 316 S.S./A276
۴ Gland 316 S.S./A276
۵ Back-up Ring PEEK
۶ Packing PTFE
۷ Stem 316 S.S./A276
۸ Gasket PEEK
۹ Pin 303 S.S.
۱۰ Body 316 S.S./A479
۱۱ Ball 316 S.S./A276
۱۲ Seat PEEKNote
۱۳ Seal PTFE
۱۴ End Connector 316 S.S./A479
Features
■Maximum working pressure:
۶۰۰۰ psi (414bar) at 100℉ (۳۸°C)
■Working temperature:
From-65℉(-۵۴℃) to 500℉(۲۶۰℃) with PEEK seat
From-22℉(-۳۰℃) to 265℉(۱۳۰℃) with PVDF seat
From -315℉(-۱۹۳℃) to 392℉(۲۰۰℃) with Devlon
V-API seat
■ A 316 stainless steel handle covered with vinyl sleeve
gives quarter turn rust-free operation.
■ Valves with PEEK seats are supplied with red sleeves
on handles. PVDF seats are identified with green
sleeves while Devlon V-API with blue ones.
■ A robust pin is to create a positive stop.
■ The stem with shoulder provides blowout proof design
to maintain seal integrity at all pressure.
■ Optional sour gas service conforms to NACE MR0175.
■ Ball valves are hydrostatic tested at the full rated pressure
and low pressure pneumatic at 70 psi.
■ ۱۰۰% factory test
■ Material traceability
Material of Construction
Note:
۱٫ Standard PEEK seats use red sleeves on handles.
۲٫ Green sleeves identify PVDF seats. Blue sleeves identify
Devlon V-API seats.
۱
۱
۲
۴
۵
۶
۷
۸
۱۰
۱۱ ۱۲ ۱۳
۱۴
۹
۳
Instrument Valves and Manifolds 35
valve & fitting
Safe Product Selection
When selecting a product, the total system
design must be considered to ensure safe
performance. Function, material compatibility,
adequate ratings, proper installation, operation
and maintenance are the responsibilities of the
system.
Operation
■ Valves are designed to control fluids in full open or full
closed position.
■ Valves that have not been actuated for a period of time
may require a higher initial actuation torque.
■ Valve must be in open position during system test not
to damage the valve seat.
Dimensions
Ordering No. End Connection Bore Dimensions (mm)
Inlet Outlet L L1 H H1 W
HPBV01S4FF 1/4”NPT female 1/4”NPT female 9.52 62.4 31.2 61 32 87
HPBV01S6FF 3/8”NPT female 3/8”NPT female 9.52 62.4 31.2 61 32 87
HPBV01S8FF 1/2”NPT female 1/2”NPT female 9.52 86.5 43.25 61 32 87
HPBV01S4OD 1/4” O.D. 1/4” O.D. 9.52 89.8 44.9 61 32 87
HPBV01S6OD 3/8” O.D. 3/8” O.D. 9.52 93.4 46.7 61 32 87
HPBV01S8OD 1/2” O.D. 1/2” O.D. 9.52 98.4 49.2 61 32 87
All dimensions shown are for reference and subject to change without prior notice.
Sizes listed are standard. Other sizes and end types are available upon request. Refer to ordering information.
Ordering Information
HPBV S 4 FF
Series Body Material Size End Connection Seat Material
HPBV01 S 316 S.S. 4 1/4” FF Female X Female PK PEEK
۶ ۳/۸”
OD VEE-LOK twin ferrule
tube fittings
PV PVDF
۸ ۱/۲” DV Devlon V-API
۳۶ Instrument Valves and Manifolds
valve & fitting
High Pressure Ball Valve
HPBV02 series
Features
■Maximum working pressure:
۶۰۰۰ psi (414bar) at 100°F (38°C)
■Working temperature:
-۶۵°F (-54°C) to 392°F (200°C)
■ ۳۱۶ SS mini ball valve overcomes limitation of installment
space.
■ A quick 1/4 turn on-off control of fluids used in process
and instrumentation applications.
■ ۹۰ degree actuation operates with low torques.
■ Straight through flow path for minimum pressure drop
and bi-directional flow.
■ Fine finished ball provides a positive seal.
■ PEEK seat withstands high pressure circumstances.
■ Panel mountable nut.
Pressure Rating and Tubing Selection
For working pressures of VEE-LOK tube ends, please refer
to working pressure table found in tube fitting catalogue.
For working pressures of valves with pipe threads, please
see catalogue of instrument pipe fittings.
Material of Construction
Component Valve Body Material
۳۱۶ S.S.
Handle ABS
Packing Nut 316 S.S./A276
Gasket 316 S.S./A276
Seal PTFE
Retainer PEEK
Stem 316 S.S./A276
End Connector 316 S.S./A479
Body 316 S.S./A479
Ball 316 S.S./A276
O-Ring Seal VITON
Seat PEEK
HANDLE SET SCREW
PACKING NUT
GASKET
STEM SEAL
STEM RETAINER
STEM
PANEL NUT
BALL
HANDLE
END CONNECTOR BODY O-RING SEAL
SEAT
Instrument Valves and Manifolds 37
valve & fitting
Dimensions
Ordering Information
HPBV02 S 4 OD
Series Body Material Size End Connection
HPBV02 S 316 S.S. 4 1/4” F female
۶ ۳/۸” NPT female-female
۸ ۱/۲” OD VEE-LOK twin ferrule tube fittings
M6 6mm
M8 8mm
M10 10mm
M12 12mm
Ordering No. End Connection Orifice
(bore)
Dimensions (mm)
Inlet Outlet L L1 H H1 P T
HPBV02S2FF 1/8”NPT female 1/8”NPT female 5 53.2 26.6 47.5 20 15 6.5
HPBV02S4FF 1/4”NPT female 1/4”NPT female 5 53.2 26.6 47.5 20 15 6.5
HPBV02S6FF 3/8”NPT female 3/8”NPT female 7 61.6 30.8 54.2 25 18 8.5
HPBV02S8FF 1/2”NPT female 1/2”NPT female 9.5 96.53 48.27 64.87 32 18 8.5
HPBV02S2OD 1/8” O.D. 1/8” O.D. 5 62.8 31.4 47.5 20 15 6.5
HPBV02S4OD 1/4” O.D. 1/4” O.D. 5 67.8 33.9 47.5 20 15 6.5
HPBV02S6OD 3/8” O.D. 3/8” O.D. 7 76.8 38.4 54.2 25 18 8.5
HPBV02S8OD 1/2” O.D. 1/2” O.D. 9.5 89.53 44.77 64.87 32 18 8.5
HPBV02SM6OD 6mm O.D. 6mm O.D. 5 68.8 34.4 47.5 20 15 6.5
HPBV02SM8OD 8mm O.D. 8mm O.D. 5 70.4 35.2 47.5 20 15 6.5
HPBV02SM10OD 10mm O.D. 10mm O.D. 7 78.6 39.3 54.2 25 18 8.5
HPBV02SM12OD 12mm O.D. 12mm O.D. 9.5 89.53 44.77 64.87 32 18 8.5
T=max. panel thickness
P=panel hole diameter
All dimensions shown are for reference and subject to change without prior notice.
Sizes listed are standard. Other sizes and end types are available upon request. Refer to ordering information.
۳۸ Instrument Valves and Manifolds
Dimensions
All dimensions shown are for reference and subject to change without prior notice.
Sizes listed are standard. Other sizes and end types are available upon request. Refer to ordering information.
Ordering Information
HPBV03 S 4 OD
Series Body Material Size End Connection
HPBV03 S 316 S.S. 4 1/4” F female
۶ ۳/۸” NPT female-female
۸ ۱/۲” OD VEE-LOK twin ferrule tube fittings
M6 6mm
M8 8mm
M10 10mm
Ordering No. End Connection Orifice
(bore)
Dimensions (mm)
Inlet Outlet L L1 H H1 P T
HPBV03S2FF 1/8”NPT female 1/8”NPT female 5 53.2 26.6 65 26 15 6.5
HPBV03S4FF 1/4”NPT female 1/4”NPT female 5 53.2 26.6 65 26 15 6.5
HPBV03S6FF 3/8”NPT female 3/8”NPT female 7 61.6 30.8 73 30.5 18 8.5
HPBV03S2OD 1/8” O.D. 1/8” O.D. 5 62.8 31.4 61.8 24.7 15 6.5
HPBV03S4OD 1/4” O.D. 1/4” O.D. 5 67.8 33.9 64.8 27.7 15 6.5
HPBV03S6OD 3/8” O.D. 3/8” O.D. 7 76.8 38.4 73.45 31.8 18 8.5
HPBV03SM6OD 6mm O.D. 6mm O.D. 5 68.8 34.4 65.3 28.3 15 6.5
HPBV03SM8OD 8mm O.D. 8mm O.D. 5 70.4 35.2 66.1 29 15 6.5
HPBV03SM10OD 10mm O.D. 10mm O.D. 7 78.6 39.3 74.3 32.65 18 8.5
T=max. panel thickness
P=panel hole diameter
Instrument Valves and Manifolds 39
valve & fitting
valve & fitting
Features
■Maximum working pressure:
۲۰۰۰ psi (138 bar) at 100°F (38°C)
■Working temperature:
-۲۲°F (-30°C) to 392°F (200°C)
■ Compact design with one piece hexagonal body in
threaded connections and available in tube ends.
■ Low torque for easy operation.
Material of Construction
High Pressure Ball Valve
HPBV04 series
Component Valve Body Material
۳۱۶ L S.S.
Body 316 L S.S./A479
Ball 316 L S.S./A276
O-Ring Seal VITON
Seat Devlon V-API
End Connector 316 L S.S./A479
Stem 316 L S.S./A479
Inner Packing PEEK
Outer Packing PTFE
Gland Washer 316 L S.S./A276
Handle 316 L S.S./A276
Lock Nut 302 S.S.
LOCK NUT
GLAND WASHER
OUTER PACKING
INNER PACKING
STEM
SEAT SEAT
BALL ORING
END CONNECTOR
HANDLE
۴۰ Instrument Valves and Manifolds
valve & fitting
Dimensions
Ordering No. End Connection Orifice
(bore)
Dimensions (mm)
Inlet Outlet L L1 L2 H
HPBV04S8FF 1/2”NPT female 1/2”NPT female 9 54.5 85.6 39.2 27
HPBV04S8OD 1/2”O.D. 1/2”O.D. 9 98 85.6 39.2 27
HPBV04SM12OD 12mm O.D. 12mm O.D. 9 98 85.6 39.2 27
All dimensions shown are for reference and subject to change without prior notice.
Sizes listed are standard. Other sizes and end types are available upon request. Refer to ordering information.
Ordering Information
HPBV04 S 8 FF
Series Body Material Size End Connection
HPBV04 S 316 S.S. 8 1/2” F female
M12 12mm OD VEE-LOK twin ferrule tube fittings
L
H
L2
L1
Instrument Valves and Manifolds 41
valve & fitting
Features
■Maximum working pressure:
۶۰۰۰ psi (414bar) at 100°F (38°C)
■Working temperature:
۲۵°F (-4°C) to 250°F (121°C)
■ Utilized to protect pressure gauges from damage
caused by pressure pulses and pressure peaks.
■ Provided with an adjustable needle valve that enables
the operator to restrict the flow when operating conditions
may demand even when the sunbber is in service.
Material of Construction
Pressure Gauge Snubber
PGS series
Component Material Grade
ASTM specification
Body 316 S.S./A479
Bonnet 316 S.S./A276
Stem 316 S.S./A276
O-ring Viton
Ordering No. End Connection Dimensions
(mm)
Inlet Outlet L L1 H
PGSS4MF 1/4”NPT male 1/4”NPT female 52 25 27
PGSS8MF 1/2”NPT male 1/2”NPT female 62 30 27
۴۲ Instrument Valves and Manifolds
valve & fitting
Adjustable Overload Protector
AOP series
Features
■Maximum working pressure:
۶۰۰۰ psi (414bar) at 100°F (38°C)
■Working temperature:
-۱۳°F (-25°C) to 212°F (100°C)
■SETTING RANGE:
۰٫۵~۴ BARS
۲~۶۰ BARS
۶۰~۲۰۰ BARS
■ Used to protect pressure gauges and pressure switches
from overpressure. When pressure exceeds the preset
pressure, the device automatically shuts off the
pressure to the instrument.
■ Pressure adjustment can be done by manipulating an
external adjusting screw and lock nut.
Material of Construction
Ordering No. End Connection Dimensions (mm)
Inlet Outlet L L1 H H1 L2
AOPS8 1/2”NPT male 1/2”NPT female 75.5 32.5 98.5 77 31
Instrument Valves and Manifolds 43
valve & fitting
Features
■Traps fine particles to maintain system purity
■Compact in-line design for limited space
■ Replaceable sintered 316 stainless steel filter element
available in 1,5,10 and 50 microns
■ Maximum working pressure 3000 psi @100°F (206 bar
@۳۸°C)
■ Replaceable sintered elements are available in 0.5, 2,7,
۱۵ and 60 microns
■ Tee type filter element can be replaced without
removing body from system.
■ Optional Bypass for sampling or purging of process
fluid
Material of Construction
Filter
F Series
TF Series
Component Material
Cap 316 SS/A479
Seal Viton
Sintered Element 316 SS
Spring 302 SS
Guide Ring PTFE
Body 316 SS/A479
Component Material
Body 316 SS/A479
Gasket 316 SS/silver plated
Sintered Element 316 SS
Spring 302 SS
Cap 316 SS/A479
Nut 316 SS/A479
Retainer Ring Stainless steel
GASKET
SINTERED ELEMENT
SPRING
CAP
NUT
RETAINER RING
SEAL BODY
BODY
SPRING
CAP
GUIDE RING
SINTERED ELEMENT
۴۴ Instrument Valves and Manifolds
Dimensions
F Series
Ordering No. End Connection Dimensions (mm)
Inlet/Outlet Size A F
F01S2OD-□ VEE-LOK tube fitting 1/8” ۵۵٫۷ ۱۹
F01S4OD-□ VEE-LOK tube fitting 1/4” ۶۱٫۵ ۱۹
F01SM6OD-□ VEE-LOK tube fitting 6mm 61.5 19
F01S2MM-□ Male NPT 1/8” ۴۶٫۵ ۱۹
F01S2FF-□ Female NPT 1/8” ۵۱٫۰ ۱۹
F01S4MM-□ Male NPT 1/4” ۵۵٫۵ ۱۹
F01S4FF-□ Female NPT 1/4” ۶۱٫۰ ۱۹
Ordering No. End Connection Dimensions (mm)
Inlet/Outlet Size A E F
TF01S2OD-□ VEE-LOK tube fitting 1/8” ۶۲٫۴ ۵۵٫۹ ۲۸٫۶
TF01S4OD-□ VEE-LOK tube fitting 1/4” ۶۸٫۲ ۵۵٫۹ ۲۸٫۶
TF01S6OD-□ VEE-LOK tube fitting 3/8” ۷۲٫۱ ۵۵٫۹ ۲۸٫۶
TF01S8OD-□ VEE-LOK tube fitting 1/2” ۷۷٫۲ ۵۵٫۹ ۲۸٫۶
TF01SM6OD-□ VEE-LOK tube fitting 6mm 68.2 55.9 28.6
TF01SM8OD-□ VEE-LOK tube fitting 8mm 72.1 55.9 28.6
TF01SM10OD-□ VEE-LOK tube fitting 10mm 72.6 55.9 28.6
TF01SM12OD-□ VEE-LOK tube fitting 12mm 77.2 55.9 28.6
TF01S4MM-□ Male NPT 1/4” ۶۲ ۵۵٫۹ ۲۸٫۶
TF01S4FF-□ Female NPT 1/4” ۶۲ ۵۵٫۹ ۲۸٫۶
TF01S8MM-□ Male NPT 1/2” ۶۹٫۹ ۵۵٫۹ ۲۸٫۶
TF Series
Ordering Information
F01 S 4 FF 10
TF01
Series Body Material Size End Connection Sintered Element
S 316 S.S. 2 1/8” OD VEE-LOK tube fitting 0.5μm 05
۴ ۱/۴” MM Male-Male NPT 2μm 2
۶ ۳/۸” FF Female-Female NPT 7μm 7
۸ ۱/۲” ۱۵μm 15
M6 6mm 60μm 60
M12 12mm
Sintered Elements
■ Add an element designator to the basic
ordering number.
Example: TF01S8OD-60
Nominal Pore Size μm Pore Size Range μm Element Designator
۰٫۵ ۰٫۵ to 2 05
۲ ۱ to 4 2
۷ ۵ to 10 7
۱۵ ۱۱ to 25 15
۶۰ ۵۰ to 75 60
The selection of a filter for any
a p p l i c a t i o n o r s y s t e m d e s i g n
must be considered to ensure
safe performance. Filter function,
rating, material compatibility,
p r o p e r i n s t a l l a t i o n , o p e r a t i o n
a n d m a i n t e n a n c e r e m a i n t h e
responsibilities of the system
designer and user.
Instrument Valves and Manifolds 45
valve & fitting
valve & fitting
Features
■Maximum working pressure:
۶۰۰۰ psi (414bar) at 100°F (38°C)
■Working temperature:
-۶۵°F (-54°C) to 464°F (240°C)
■ A fully contained sealing mechanism
■ Designed to provide 360°rotational movement to
enable maximum positional orientation of installed
gauges and measuring instruments.
■ Silver plated swivel nuts prevent thread galling and
allow repeatable re-assembly.
Material of Construction
Gauge Adapter
GA series
Component Material Grade
ASTM Specification
Body 316 S.S./A479
Nut 316 S.S./A479
Adapter 316 S.S./A479
Seal PTFE
Ordering
No.
Male x Female Dimensions (mm)
Connection L L1 H
GAS4M4F 1/4”NPT 67.5 27 35
GAS8M8F 1/2”NPT 72.5 32 35
۴۶ Instrument Valves and Manifolds
www.veelok.com
Vertex Co., Ltd.
۳F, No.3, Lane 551, Sec. 1, Wanshou Rd.,
Gueishan Township, Taoyuan County 33351,
Taiwan
Tel: +886 2 8200 3813
Fax: +886 2 8200 3817
vertex.jo@msa.hinet.net
